The Stan's Flow EX offers a wide, strong 26" disc option that doesn't weigh a thousand pounds, (like many 26" DH rims with a 25mm inner from the days of yore). While it's fun to pretend that you're building your wheel set with a set of rims destined for a motorcycle, it's not fun trying to pedal them up the side of a mountain. The Flow EX, with a 25.5mm tubeless ready inner, at approximately 500g, strikes the balance between strength, width and weight. You can build them up into relatively light weight wheels, and pedal them anywhere you want to go. Given their inner width, you can happily run 2.5" tires on them, and play around with low tire pressures. From our experience, we've found that the Flow EX often subs in as a DH type wheel set build, and/or for riders that are looking for strength and durability in general.
You have the choice to build these wheels with Speed Tuned Super 6 2.0 MTB hubs, or go all out with DT Swiss 350 disc hubs featuring the DT Swiss Star Ratchet engagment mechanism. Both are great options. The Speed Tuned Super 6 2.0 hubs feature 36 points of engagement, (10 degrees) via a 4x2 pawl free hub. The drive ring and pawls are overbuilt in terms of diameter, (drive ring), height, (drive ring + pawls), and materials, (quality stainless). Their bearing placement is proper, in terms of overall design meant to promote hub function and durability.
DT Swiss 350 hubs are excellent, they are finished to incredible standards, and include DT Swiss' Star Ratchet engagement system, (same exact drive mechanism as with their DT 240's and 180's). These hubs get the job done, hold up extremely well in an assortment of conditions, and have proven reliable even in the emerging context of high torque drive trains, (29er wheel bikes with 1x12 Eagle drive trains). Essentially, DT 350's offer you the option of buying one of the best performing hubs available anywhere, for only a modest price bump. Given their huge value proposition, they are hands down a great option for any MTB rider that cares about their gear.
In "stock" form, these wheels are built with DT Swiss Competition Double Butted 2.0/1.8/2.0 black spokes in a 32 hole, three cross configuration front and rear. DT Comp spokes offer legendary quality and performance. If you didn't know a thing about spokes, know that your wheels would come with a really top notch spoke product. That being said, we're offering a spoke upgrade option, in the form of Sapim DLight 2.0/1.65/2.0 spokes. There are two great spoke manufacturers in the world, DT Swiss and Sapim, (in alphabetical order). Essentially, you might be able to find a spoke product that approaches their quality, but you'd be hard pressed to find a company that makes a better spoke product than these two. All their spoke products, from straight gauge to their elliptically bladed and butted products, are all the best of the best. Sapim Dlight spokes will perform at the same relative level as DT Competition spokes, but will shave off approximately 75 - 80g from the wheel set.
-Comes with tubeless tape & valves installed.
-The Flow EX has a 25.5mm inner width, is 17.8mm tall, 29.1mm wide, and weighs about 500g
-Recommended for use with 26" x 2.1 - 2.5" tires
-These wheels are built with internal stainless steel washers.
-Wheel set weight with Super 6 2.0 15/142 hubs and alloy nipples is approximately 1860g (Comp) or 1785g (Dlight); with DT 350 hubs wheel set weight is approximately 1890g (Comp) or 1810g (Dlight). Wheel set weight will vary with end caps, freehub driver, and nipple selection. Tape + Valves adds approximately 35g for the wheel set, on average.