BWW XC Pro 26 Custom Build

Convertible between QR and TA
Boost Option
Features Star Ratchet engagement
Back to List
$399.99 - $929.99
SKU: 80242-26
Front Hub 6 Bolt disc:
Rear Hub 6 Bolt disc:

Ships FREE to the US48 states

Bicycle Wheel Warehouse is introducing four new tubeless ready MTB rims, the XC Pro, Trail Pro, and Enduro Pro, and AM Pro.  Respective to each rim's type, these rims are wider, lighter, and stronger than a lot of other disc options in the marketplace. They achieve this trifecta of awesomeness via their modern, purposeful design, and utilization of quality aluminum alloy.  A simple formula that works well.

All four options offer wide, tubeless ready inner rim profiles, and come with tape & valves installed.

More about the XC Pro.

The Bicycle Wheel Warehouse XC Pro rim is all about light weight, and speed.  With a 20mm tubeless ready inner profile, these rims weigh in at a scant 330g per rim.  Given their price point, they offer an incredible value.  The outer rim width is 25mm, rim height comes in at 17mm.  This rim is extremely light weight, yet still very capable.  Even though these rims are super light, we're building them with 32 spokes front and rear, so you'll still appreciate their lateral stiffness, and ability to hold up, even over broken terrain or through the occassional rock garden.

You have the choice to build these wheels with Speed Tuned Super 6 2.0 MTB hubs, or go all out with DT Swiss 350 disc hubs featuring the DT Swiss Star Ratchet engagment mechanism.  Both are great options.  The Speed Tuned Super 6 2.0 hubs feature 36 points of engagement, (10 degrees) via a 4x2 pawl free hub.  The drive ring and pawls are overbuilt in terms of diameter, (drive ring), height, (drive ring + pawls), and materials, (quality stainless).  Their bearing placement is proper, in terms of overall design meant to promote hub function and durability.

DT Swiss 350 hubs are excellent, they are finished to incredible standards, and include DT Swiss' Star Ratchet engagement system, (same exact drive mechanism as with their DT 240's and 180's).  These hubs get the job done, hold up extremely well in an assortment of conditions, and have proven reliable even in the emerging context of high torque drive trains, (29er wheel bikes with 1x12 Eagle drive trains).  Essentially, DT 350's offer you the option of buying one of the best performing hubs available anywhere, for only a modest price bump.  Given their huge value proposition, they are hands down a great option for any MTB rider that cares about their gear.

In "stock" form, these wheels are built with DT Swiss Competition Double Butted 2.0/1.8/2.0 black spokes in a 32 hole, three cross configuration front and rear.  DT Comp spokes offer legendary quality and performance.  If you didn't know a thing about spokes, know that your wheels would come with a really top notch spoke product.  That being said, we're offering a spoke upgrade option, in the form of Sapim DLight 2.0/1.65/2.0 spokes.  There are two great spoke manufacturers in the world, DT Swiss and Sapim, (in alphabetical order).  Essentially, you might be able to find a spoke product that approaches their quality, but you'd be hard pressed to find a company that makes a better spoke product than these two.  All their spoke products, from straight gauge to their elliptically bladed and butted products, are all the best of the best.  Sapim Dlight spokes will perform at the same relative level as DT Competition spokes, but will shave off approximately 75 - 80g from the wheel set.

Wheel Facts:

-Comes with tubeless tape & valves installed.

-The XC Pro has a tubeless ready 20mm inner width, is 17mm tall, 25mm wide, and weighs about 330g

-Recommended for use with 26" (ETRTO = 559) x 1.75 - 2.25" tires

-These wheels are built with an emphasis on consistent spoke tension and finished to exacting standards.

-Wheel set weight with Super 6 2.0 15/142 hubs and alloy nipples is approximately 1525g (Comp) or 1450g (Dlight); with DT 350 hubs wheel set weight is approximately 1550g (Comp) or 1475g (Dlight).  Wheel set weight will vary with end caps, freehub driver, and nipple selection.  Tape + Valves adds approximately 35g-40g for the wheel set, on average.