The Stan's Flow MK3 builds upon the phenomenal success of its predecessor the Flow EX, which thankfully was a wide departure from it's predecessor, the original Flow. The current Flow MK3 promotes it's 29mm inner "BST" profile, (linked for more info), as well as Stan's WideRight rim profiles system, which "allow the tire to achieve its proper shape,...", unless it's not the right rim width for your tire, in which case you select a different Stan's WideRight rim option. Pretty straight forward.
You have the choice to build these wheels with Speed Tuned Super 6 2.0 MTB hubs, or go all out with DT Swiss 350 disc hubs featuring the DT Swiss Star Ratchet engagement mechanism. Both are great options. The Speed Tuned Super 6 2.0 hubs feature 36 points of engagement, (10 degrees) via a 4x2 pawl free hub. The drive ring and pawls are overbuilt in terms of diameter, (drive ring), height, (drive ring + pawls), and materials, (quality stainless). Their bearing placement is proper, in terms of overall design meant to promote hub function and durability.
DT Swiss 350 hubs are excellent, they are finished to incredible standards, and include DT Swiss' Star Ratchet engagement system, (same exact drive mechanism as with their DT 240's and 180's). These hubs get the job done, hold up extremely well in an assortment of conditions, and have proven reliable even in the emerging context of high torque drive trains, (29er wheel bikes with 1x12 Eagle drive trains). Essentially, DT 350's offer you the option of buying one of the best performing hubs available anywhere, for only a modest price bump. Given their huge value proposition, they are hands down a great option for any MTB rider that cares about their gear.
In "stock" form, these wheels are built with DT Swiss Competition Double Butted 2.0/1.8/2.0 black spokes in a 32 hole, three cross configuration front and rear. DT Comp spokes offer legendary quality and performance. If you didn't know a thing about spokes, know that your wheels would come with a really top notch spoke product. That being said, we're offering a spoke upgrade option, in the form of Sapim DLight 2.0/1.65/2.0 spokes. There are two great spoke manufacturers in the world, DT Swiss and Sapim, (in alphabetical order). Essentially, you might be able to find a spoke product that approaches their quality, but you'd be hard pressed to find a company that makes a better spoke product than these two. All their spoke products, from straight gauge to their elliptically bladed and butted products, are all the best of the best. Sapim Dlight spokes will perform at the same relative level as DT Competition spokes, but will shave off approximately 75 - 80g from the wheel set.
The Flow MK3 is a stellar wheel set option, in a field that's composed of some of the best aluminum alloy MTB rims ever. Given their level of performance, they are an unbeatable deal, (coupon codes here). We're not joking around here. If you don't have a lot of time to research all the rim options in the marketplace, if you don't have a lot of money, and if you can find this product page, maybe that's Magic.
-Comes with tubeless tape & valves installed.
-The Stan's Flow MK3 (welded joint), has a 28.9mm inner width, is 15.8mm tall, 32.4mm wide, and weighs about 525g
-Recommended for use with 29er x 2.35" - 2.8" tires
-These wheels are built with internal stainless steel washers.
-Wheel set weight with Super 6 2.0 15/142 hubs and alloy nipples is approximately 1930g (Comp) or 1855g (Dlight); with DT 350 hubs wheel set weight is approximately 1955g (Comp) or 1880g (Dlight). Wheel set weight will vary with end caps, freehub driver, and nipple selection. Tape + Valves adds approximately 35g for the wheel set, on average.